제품 소개:
활성 산화알루미늄이라고도 하는 활성 알루미나는 건조제, 흡착제, 촉매 담체, 수처리의{0}탈불소화, 염화물 제거, 클로스 촉매 등으로 사용됩니다. 그것은 높은 다공성 구조, 높은 표면적, 높은 선택도, 높은 흡수율 등을 가지고 있습니다.
Chemical Formula: Al2O3• nH2O
Xiangrun and Bairui produce high quality activated alumina and alumina adsorbent with warranty. We devoted ourselves to alumina industry several years, covering Europe, America, Asia's market. We are expecting to become your long-term partner in China.
애플리케이션

●-Dehydration of gas and liquid streams
●-Sulfur recovery via Claus catalyst
●-Catalyst carriers
●-Selective adsorption and purification of hydrocarbons streams
●Compressed air drying
●Natural gas drying
●Removal of acids from transformer oils, lubricating oils, and refrigerants
●-Purification of industrial gases
●-LCD adsorbents.
●H2S and SO2 removal
●-Chromatographic separation
●-Bed support
제품 설명:
일반 알루미나 XR AA-101 alumina desiccant PTA용 XR AA-132 활성 알루미나 | 염화물/TBC 정제 ●XR CL-104, CL-104E XR-107 | 과산화물 정제 ●XR AA-107 |
SRU 클로스 촉매 ●-Alumina catalysts ●-Promoted alumina catalysts ●-Titania catalysts ●-Alumina/Titania composite catalysts ●-Bed supports | 수처리/불소 제거 ●XR AA-105 | 탄화수소 정화XR AA-104 XR AA-125 |
알루미나가 함침된 과망간산칼륨 ●XR2006®M | 촉매 담체 | 큰 기공 부피 알루미나 |
●-Available in powder, granular, and spherical forms in standard and custom sizes
●-Impressive range of adsorbent products including desiccant, chloride adsorbent, and Claus Catalysts
●-pseudoboehmite, Boehmite and boehmite-based gamma alumina powders for chemical catalysts, catalyst binders and abrasives
제품기술적인 모수
안건 | XR-101 | XR-105 | XR-107 | XR-400 | XR-135 | |
모습 | white, sphere, odourless, insoluble in water, innocuous | |||||
애플리케이션 | 흡착제, 건조제 | 탈불소화 | 흡착 H2O2 | 촉매 담체 | 공기 분리에서 탈수 및 건조 | |
결정 | x-p | x-p |
|
| x-p | |
화학적 구성 요소 | Al2O3% | 93 이상 | 93 이상 | 93 이상 | 93 이상 | 93 이상 |
Na2O 퍼센트 | 0.40 이하 | 0.3보다 작거나 같음 | 0.3-1.0 | 0.35 이하 | 0.4 이하 | |
LOI | 퍼센트 | 6-8 | 6-8 | 8 이하 | 5 이하 | 6-8 |
부피 밀도 | g/ml | 0.75 이상 | 0.75 이상 | 0.65-0.8 | 0.45-0.95 | 0.75 이상 |
표면적 | ㎡/g | 340 이상 | 300 이상 | 220-280 | 10-380 | 350 이상 |
모공 볼륨 | ml/g | 0.45 이상 | 0.42 이상 | 0.45 이상 | 0.45 이상 | 0.45 이상 |
손실 손실 | 퍼센트 | 0.1보다 작거나 같음 |
|
|
| 0.1보다 작거나 같음 |
파쇄강도(N/입자) | ф1-2mm |
| 40 이상 |
|
| 50 이상 |
ф2-3mm | 70 이상 | 80 이상 | 80 이상 | 40 이상 | 70 이상 | |
ф3-5mm | 160 이상 | 120 이상 | 100 이상 | 60 이상 | 160 이상 | |
ф4-6mm | 200 이상 |
| 130 이상 | 80 이상 | 200 이상 | |
ф5-7mm | 240 이상 |
|
|
| 240 이상 | |
ф6-8mm | 260 이상 |
|
|
| 260 이상 | |
활성 알루미나의 재생
●In the drying cycle, regeneration of active alumina is necessary. The heating and desorption processes include heating, rinsing and cooling in three steps. The higher the heating temperature, the more complete the desorption regeneration. General heating regeneration temperature is about 350 degree . The temperature of the alumina tower is generally raised to 280 degree for 4 hours. Heating rate of about 50 degree per hour. After the regeneration of the active alumina bed must be cooled before the adsorption operation, with the cooling gas to wash the bed, the gas should also be used to try not to contain water, cold gas flow and adsorption cycle of the same direction. When alumina bead is used for liquids such as propylene drying, it is necessary to first drive the liquid of the alumina bed at the time of regeneration, without any dead ends. Otherwise the residual liquid will react or carbonize upon heating, which will seriously affect the efficiency and operating life of the adsorption cycle.
●If the active aluminium oxide has good quality, it will improve its life. Certainly, whatever bad or good, you should use desiccant regeneration for future application. But Good quality performance could improve the life and drying situation. So please purchase aluminium oxide from standard activated alumina factory. Trust our company could offer you the best warranty.
전문 기술 제안:
●The specialists of our company can design the technical offer with recommendations of application adsorptive drying systems and purification of gas and-liquid flows.
●Designing of adsorption system;
●Calculations of needed quantity of adsorbents ,catalyst and alumina balls ;
●Selection of cycle time ;
●Recommendations on regeneration and cooling of the adsorbent;
●Filling instruction of adsorbents ,catalyst and alumina balls
●Technical guaranties on adsorbent operation.
배달, 포장, 배송 및 서빙:
●2-7 working days since payment receipt
●25kg/plastic bag, 150kg/new steel drum, 25kg/paper drum, 500kg/750kg/jumbo bag. The all could add wooden pallets, non-fumigation pallets and plastic pallets as your requirement.






자주하는 질문:
Q: Do you have professional team for our special active alumina to satisfy our data requirement?
A: Our engineer and technical team includes 8 people to research and develop activated alumina. Until now, we don't confront any trouble on the data.
Q: 서비스 수명은 얼마나 됩니까?
A: 일반적으로 최소 2년 또는 8000시간입니다. 우리의 경험에 비추어 볼 때 5년은 우리에게 문제가 되지 않습니다.
Q: 알루미나를 보관하는 방법은 무엇입니까?
A: Firstly, Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied. Then it should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Q: 활성 산화알루미늄을 재생할 수 있습니까?
A: 예, 올바른 방법으로 재생성할 수 있습니다. 더 많은 정보를 원하시면 저희에게 연락하실 수 있습니다.
최근 소식:Zibo Xiangrun과 Shandong Bairui는 2017년 11월에 새로운 유황 흡착제를 성공적으로 연구했습니다. 높은 유황 흡착 능력을 소유하고 신기술을 채택합니다. 자세한 내용은 당사 팀에 문의하십시오.
인기 탭: 활성 알루미나, 공급 업체, 제조업체, 속성, 가격, 수명, 용도, 분말, 유형, 생산, 재생, 구매, MSDS, HS 코드


